India's No. 1 Touchless Automatic Car Washing System
Get the best-in-class car wash solution for your dealership or service center. Contact us for a demo.
FourWin Automatic Car Wash System
FourWin Touchless Car Wash System — an inventive solution for washing equipment. The touchless car wash is assuredly the finest equipment in India to serve the best solution against manual washing.
The FourWin Touchless Carwash System does not use any brush to wash the car. Designed specifically for small, medium & premium car sizes in India, it uses high-pressure water along with foaming shampoo. The system is controlled using a PLC (Programmable Logic Controller), which can control every activity such as time and steps of the spraying process in order to get optimum results in a short time.
FourWin car wash effectively works on challenging areas like the car under-chassis area, car bonnet, and car trunk area. We exhibit consistent performance — we are India's #1 in Car Wash Systems with effective excellence in automotive care. Authenticity, secured product, and return on investment in a very small time span.
📋 Specifications
| MODEL | FOURWIN - 3010 |
| DIMENSIONS (L X W X H) - WITHOUT RAMP (STANDARD) | 7000 X 3800 X 3500 (MM) |
| DIMENSIONS (L X W X H) - WITHOUT RAMP (SQUARE TUBE) | 7000 X 3500 X 3200 (MM) |
| WATER CONSUMPTION | 110-120 LTR / CAR |
| SHAMPOO CONSUMPTION | 15-20 ML / CAR |
| WATER PRESSURE | 20-22 BAR AT PUMP DELIVERY |
| AIR PRESSURE | 6 BAR COMPRESSED AIR |
| POWER | 415 V ± 10 V, 50 Hz, 63 AMP MCB |
| WASH CAPACITY | 20 CARS / HR |
| CONTROL PANEL | PLC (PROGRAMMABLE LOGIC CONTROLLER) |
⭐ Feature & Benefits of Automatic Car Wash System
▼- Material of Construction is SS 304.
- No. of Nozzles on top wash for water spray is 12 nos with water pressure of 24 Bar & for shampoo spray is 12 nos.
- No. of Nozzles on Underbody is 20 nos with water pressure of 24 Bar.
- Pump used is centrifugal vertical multistage pump which is maintenance free.
- Efficiency Driven / Increase Productivity
- Helps in increasing customer satisfaction
- Reduces the dependency on manpower
- Can cater more load at any given time
- Saves electricity, water.
- Washes a vehicle in just 3 Min.
🔧 Pre-installation Requirements
▼- 3 Phase electric supply (4 Sq. mm X 4 C) : 415 V ± 10 V, 50 Hz up to our control panel.
- 63 Amp, 4 Pole MCB just before the control panel.
- Overhead water tank from ground level to 15ft height. The min. size of water tank should be 3000 Ltrs. Pipeline from Overhead tank to inlet of Pump should be 2″.
- 6 bar compressed air connection up to our control panel.
- Y Shape Strainer in the inlet line before our pump (Y-Strainer size - 1 ¼″).
- Covering / Shed for the entire system (Including pump & Panel, Shed Height - Above 5 Mtr. from ground level to top).
- Incoming Cable 4 Sq. mm X 4 Core + Earthing.
- PCC - 6″ (150 mm – Thickness).
- Clear floor area for installation & Underbody pit.
- Proper drainage line.
- FRL Unit in pneumatic inlet line.
